[PR] Gain and Get More Likes and Followers on Instagram.

#regrind

3669 posts

TOP POSTS

This was a gen 3 xm18, I changed up the stop pin placement to the gen 4 location and fit the blade to the change. Then I hand-rubbed the flats (to 400 grit), sterilized and satin finished the entire blade, and finished with a 400 grit compound regrind.

Facet ground V block is well within my measuring capabilities at this time. Looks like I need an electronic indicator. Now to get it square, but first I need to finish my comparator.

#toolmaking #regrind #surfacegrinder #instamachinist

Did a regrind, rounded the handles and sanded off all the yellow dirt on the scales. The regrind actually got rid of some blade play!! :o
#reeppppppp #regrind

Changed up the blade shape and reground to 220 grit. Set the edge to .010" thick at 15 dps and allowed the tip to get wider for more strength, sitting at .023" thick. While the blade shape change lost just under 1/4", the edge length remained the same due to me pushing the plunge line back all the way to the handle.

Video for it.#regrind #jbincustom

Worked on my @crkt_knives M-16 14zsf. Started off just wanting to replace a missing thumb stud , turned into a regrind and full makeover. Sand blasted everything but the blade. Then acid etched it all. Texture ground the plastic handles with 50 grit then I kryloned , aged and then clear coated those. The blade is AUS 8. I opened the hollow grind up with a 12 inch wheel and worked the swedge a bit more then hit the whole thing with a 400 cork belt. Sharpened and polished it. Used a 8/32 stainless Allen head bolt, drilled and tapped another Allen head bolt to use as the thumb stud. Fun lil project on my one day off this week. @redhorse_tactical #redhorse_tactical #knives #regrind #crkt

Grinding away! Reconditioning a batch of dull carbide cutters. #carbidecuttingtool #toolgrinding #toolporn #regrinding #regrind

MOST RECENT

Changed up the blade shape and reground to 220 grit. Set the edge to .010" thick at 15 dps and allowed the tip to get wider for more strength, sitting at .023" thick. While the blade shape change lost just under 1/4", the edge length remained the same due to me pushing the plunge line back all the way to the handle.

Grinding away! Reconditioning a batch of dull carbide cutters. #carbidecuttingtool #toolgrinding #toolporn #regrinding #regrind

Worked on my @crkt_knives M-16 14zsf. Started off just wanting to replace a missing thumb stud , turned into a regrind and full makeover. Sand blasted everything but the blade. Then acid etched it all. Texture ground the plastic handles with 50 grit then I kryloned , aged and then clear coated those. The blade is AUS 8. I opened the hollow grind up with a 12 inch wheel and worked the swedge a bit more then hit the whole thing with a 400 cork belt. Sharpened and polished it. Used a 8/32 stainless Allen head bolt, drilled and tapped another Allen head bolt to use as the thumb stud. Fun lil project on my one day off this week. @redhorse_tactical #redhorse_tactical #knives #regrind #crkt

Heres the #barebones in action! Enjoy this SO much better now!
#bladerunnersystems #balisong #bearings #balisongvideos #flipping #regrind #sharp

So the #barebones is finally back!
Shortened and the sweetest regrind Ive seen on one done by @stitchedsteel
Complete with ceramic ball bearings done by @bp1251
Much different knive to flip now, thanks to these guys!
#bladerunnersystems #balisong #bearings #knivesofig #regrind #sharp

Most Popular Instagram Hashtags