#herostrings

5270 posts

TOP POSTS

#Repost @supremestringsatlanta
・・・
🚨🚨UPDATED KINETIK PATTERN🚨🚨. Top string on 2. Loop start on 3,skip,anchor,skip,anchor,si,si,si,1,si,si,si,skip,skip,tie off on last sidewall. #growthegame #herostrings #maveriklacrosse #lacrosse #lacrossestringing #alwayscustom #kinetik #maverikkinetik #kinetikhead #maverika1 #hero2 #heromesh2 #eastcoastdyes #stickdoctor #lax #heromesh

@ecdgreg and @patsmith_27 hooked up some new setups for @jwolf31. Check them out at YouTube.com/ECD

Link in our bio.
#HeroMesh #HeroStrings
#Striker #FeelTheDifference
@maveriklacrosse

💥GIVEAWAY💥GIVEAWAY 💥GIVEAWAY 💥 When I hit 1000 followers I will send this @boombahlax #compressor with @ecdlax #heromesh redstriker and #herostrings to one lucky person. To enter just. 1: Follow me 2: Like this post 3: Tag 5 friends! All entries will be taken from this post and announced when I hit 1000. Thanks and good luck !#laxlife #growthegame

Little preview of the best looking head I've ever strung🔥
#eastcoastmesh #herostrings

Alright sorry it's been forever but finally here it is. It only took like 4 tries. @ecdlax @redstarlax @threedmesh @ecdgreg #mydiamondsarebiggerthanyours #threedmesh #eastcoastdyes #lacrosse #herostrings

Centrik on a Hyperlite strung with JW1 White Striker Hero Mesh! #herostrings #lacrosse #lax #mvrk #hero @jwalters1 @ecdlax @ecd_nation

Strung a Nike Alpha U with #heromesh and #herostrings on a #carbonpro for a sick new setup for Chase

just strung up my new backup. its a @nikelacrosse #ceo with @ecdlax @ecd_nation #heromesh and #herostrings

MOST RECENT

#Repost @supremestringsatlanta
・・・
🚨🚨UPDATED KINETIK PATTERN🚨🚨. Top string on 2. Loop start on 3,skip,anchor,skip,anchor,si,si,si,1,si,si,si,skip,skip,tie off on last sidewall. #growthegame #herostrings #maveriklacrosse #lacrosse #lacrossestringing #alwayscustom #kinetik #maverikkinetik #kinetikhead #maverika1 #hero2 #heromesh2 #eastcoastdyes #stickdoctor #lax #heromesh

🚨🚨UPDATED KINETIK PATTERN🚨🚨. Top string on 2. Loop start on 3,skip,anchor,skip,anchor,si,si,si,1,si,si,si,skip,skip,tie off on last sidewall. #growthegame #herostrings #maveriklacrosse #lacrosse #lacrossestringing #alwayscustom #kinetik #maverikkinetik #kinetikhead #maverika1 #hero2 #heromesh2 #eastcoastdyes #stickdoctor #lax #heromesh

Strung this Proton4 with a nice mid-high pocket with @ecdlax hero strings and mesh. @ecd_nation #feelthedifference #heromesh #herostrings #ecd #ecdheromesh #ecdnation

My @maveriklacrosse Kinetik in HyperLite Blue! Thanks to @clan_stringing for the LE @ecdlax Hero I got off @sidelineswap. #feelthedifference #Hero2.0 #HeroStrings #Lit 💦

picture does not do any justice.... super shifty pocket with a super clean and quick release and tons of hold!
#ECDNation #Hero2 #LE #USA #HeroStrings #Kinetik

Strung this #stx #stallion700 up with some #hero2 mesh from #ecd with #herostrings What do you guys think of this set up? @ecdlax @tecladolax @standard_lacrosse

Here is Kaden's Epoch Hawk Prequel strung with Stringking Type 3s and ECD Hero Strings! @ecdlax @ecd_dan @ecd_nation @stringking @teamstringking @epochlax @i.am.epoch #EpochPrequel #EpochLax #HeroStrings #Stringking #ConsistencyIsKing #Type3

@ecdlax #mirage with #vortexmesh and #herostrings strung with a high pocket, good channel and little whip

#ecd #lax #lacrosse #mirage #stringing

@ecdlax #mirage with #vortexmesh and #herostrings strung with a high pocket, good channel and little whip

#ecd #lax #lacrosse #mirage #stringing

@ecdlax #mirage with #vortexmesh and #herostrings strung with a high pocket, good channel and little whip

#ecd #lax #lacrosse #mirage #stringing

Here's my maverick tactik strung up with ecd hero mesh and her so strings @ecdlax @ecd_nation #heromesh #herostrings #ecdnation

Check out our buddy from across the ponds honest and appreciated review. Thanks @daydreamdisease 🚀🚀. #Repost @daydreamdisease (@get_repost)
・・・
@rocketmeshlax sent me a stringing kit to try out, here's some of my thoughts after using it for a while.
It feels great, has a near instant break in and holds itself really well, the fibers it's made from means that the pocket has stayed the same as when I strung it and it won't stretch and bag out.

The #diamonds are a little larger than usual so my normal pattern for this head didn't give the pocket I was used to and so I strung it twice, but I feel like any #stringers can handle this, plus the added strength is worth the bigger diamonds.
The #semi-soft #mesh was a little bit harder than I was expecting, similar to throne fiber I found, but still has great feel and hold when cradling. The mesh feels great when #shooting and feeding too, extremely consistent.

The mesh is also really water resistant which is great for #uklacrosse.

The #shooters are spot on, one of my favourite things about the kit. My only complaint with the strings is that there isn't a nylon, I'd love to see a thicker nylon string similar to those in the #herostrings and #throne strings. The strings strung well, tough the tips did cause some problems when going through a hole twice (I had to cut them off to do the #triangletop) but most likely would need to be cut off after stringing anyway.
I love the rocket tag at the bottom of the mesh, I think these guys are doing great things, great piece of mesh, I look forward to colours that I hope they add I'm the future to match their butt ends!
Overall I'd say a great choice over other leading mesh brands for a fraction of the price and weight!

@rocketmeshlax sent me a stringing kit to try out, here's some of my thoughts after using it for a while.
It feels great, has a near instant break in and holds itself really well, the fibers it's made from means that the pocket has stayed the same as when I strung it and it won't stretch and bag out.

The #diamonds are a little larger than usual so my normal pattern for this head didn't give the pocket I was used to and so I strung it twice, but I feel like any #stringers can handle this, plus the added strength is worth the bigger diamonds.
The #semi-soft #mesh was a little bit harder than I was expecting, similar to throne fiber I found, but still has great feel and hold when cradling. The mesh feels great when #shooting and feeding too, extremely consistent.

The mesh is also really water resistant which is great for #uklacrosse.

The #shooters are spot on, one of my favourite things about the kit. My only complaint with the strings is that there isn't a nylon, I'd love to see a thicker nylon string similar to those in the #herostrings and #throne strings. The strings strung well, tough the tips did cause some problems when going through a hole twice (I had to cut them off to do the #triangletop) but most likely would need to be cut off after stringing anyway.
I love the rocket tag at the bottom of the mesh, I think these guys are doing great things, great piece of mesh, I look forward to colours that I hope they add I'm the future to match their butt ends!
Overall I'd say a great choice over other leading mesh brands for a fraction of the price and weight!
Don't forget to check out my YouTube video! Link in the bio! #lacrosse @stringerscommunity

The new @maveriklacrosse Kinetik is insane. The tension lock takes some getting used to but once you start the channel it's really easy to string. Pattern: Topstring on second hole. Loop start on 3,Skip,Anchor Knot,Skip,Anchor Knot,SI,1,2,1,1,1skip,Skip,SI,Tie it off on 9 diamond row. #kinetik #lacrossestringing #hero2 #heromesh #herostrings #lacrosse #seasonready #FireAtWill #laxbros #lax #maveriklacrosse #alwayscustom #topshelf

@stxmlax Stallion 500 with @ecdlax #heromesh and #herostrings

Most Popular Instagram Hashtags