#carbonforthepeople

MOST RECENT

Ultralight Carbon-Ti 27.5 gravel wheelset for Graeme. Built with Sapim Dlight spokes and Wheelsmiths brass nipples, 28 2-cross, 1206g.
#wheelbuilding #handbuiltwheels #gravelgrinder #carbonforthepeople #xiamencityspecial

One of our sponsored rider’s @highoncarbon13 is chomping at the bit for his new Spark C.R.L 1 Wheels, but with the San Dimas Stage Race happening this weekend, we couldn’t leave him high and dry, so we strapped some of our Spark tubular race carbon’s to make sure he was golden. Stoked to make sure our riders are always taken care of.

finally it arrived welcome to the family #trekslash #enduromtb #magura #srameagle #carbonforthepeople #bikestorecc

China carbon... there is a hell of a lot of it out there these days and it's not all equal.. This rim has had 12 turns of tension from start.. no vertical or lateral trueing. No destressing, nothing but tension. This is gona be a very easy build.. This rim is actually a @curvecycling G3 not even the newer #geeFour and this consistency and the way in which Adam and Steve stand by their product is why i choose to build the Curves.. awesome stuff. #carbonforthepeople #supportthelocalswhosupportyou 💪

@nextiebikes premium 32 and reused Giant/DT Swiss 240 straightpull hubset for Joel. Built with not a second to spare for round 4 of @wagravityenduro this weekend in Balingup.
#wheelbuilding #handbuiltwheels #carbonforthepeople #recyclingwheels #enduromtb

@boydcycling 60mm carbon clincher and @whiteind T11 wheelset for Anthony. Built with CX Ray spokes and brass nipples.
#wheelbuilding #handbuiltwheels #carbonforthepeople

Now stocking #praxiscycleworks C32 trail/all mountain rims. 32mm internal, 38mm external, asymmetric profile, 27.5 & 29er. 425/470g. #madeintaiwan #carbonforthepeople

@hopetech pro 4 and @lbwheels 35 x 26 road build for Ash. 20/24 with Sapim CX Ray spokes , brass nipples and 10/9mm thru axle adaptors. #wheelbuilding #handbuiltwheels #carbonforthepeople

#latergram Nathan's track/fixie wheelset. @dtswiss track hubs and @lbwheels 55 x 25mm rims 20/24 with DT Comp spokes and 14mm brass nipples #wheelbuilding #handbuiltwheels #aeroiseverything #carbonforthepeople #fixie #savethetrackbike

Kurt's dowhhill wheelset with 26" @lbwheels 33 x 30mm rims. @hopetech Pro 4 DH rear with @dt_swiss_cycling Alpine III spokes 32 3-cross. #dtswiss 240s Oversized front hub 110 x 20mm with DT Competition spokes 32 3-cross #wheelbuilding #handbuiltwheels #downhill #carbonforthepeople

Tidy @lbwheels & @hopetech XC build for Ashley. All black on black except for the greyish highlights of our favourite the #wheelsmiths brass nipples #wheelbuilding #handbuiltwheels #carbonforthepeople #brassforthewin

@melodywheels 35mm #lightbicycle and @whiteind T11 rebuild with @dtswiss_ag aerolite spokes and Sapim alloy nipples. Interesting this budget rim measured lighter and rounder that the rim it replaced. Thats about all we can say. #wheelbuilding #handbuiltwheels #recyclingwheels #carbonforthepeople

27.5 x 38mm downhill @lbwheels rear wheel for Simon with a @hopetech 12 x 148mm boost Pro4 hub, DT Comp spokes, brass nipples, and bonus rainy photo wall #wheelbuilding #handbuiltwheels #carbonforthepeople #freomade #perthisok

Patrick's @chriskingbuzz R45 rebuild 24 2-cross. We increased the cross-sectional area of the spokes by 50% moving from #cxrays to DT Comps for a wheel with greater stiffness for a heavier rider. The original wheel was also built with spokes that were 5mm too long. Go figure? #wheelbuilding #handbuiltwheels #carbonforthepeople #recyclingwheels

Most Popular Instagram Hashtags