1. Clean with Xylene. -clean until the rag is not black anymore. 2. Clean just a little more. 3. Put a strong broom handle across a set of saw horses, the through the wheels. 4. Make sure the tires are inflated to operating pressure. 5. Go ahead and wipe it down again just to be sure. 6. Get your @herculiner and stir, dont shake. - Use 1 quart to coat 2 31s. 7. Cover the floor. 8. Using the roller, roll in a heavy, even coat on each tire. After the 2nd tire is done. Roll the remaining @herculiner On the centers of both tires. 9. Every 30 mins rotate the tires 180* to ensure it does not gather at the bottom. Smooth any drips or clumps if you have them with the roller. cleanup with xylene. 10. After 2 hours, it will be cured enough not to migrate. 11. Wait 24-30 hours before mounting on your "vehicle". 12. Enjoy.