bullpengarage bullpengarage

175 posts   465 followers   311 followings

Bullpen Garage  A 4x4 shop in Tucson, AZ. I aim to provide high quality products & customer service at competitive and affordable prices.

Full @artecindustries Belly Skid kit on a 4 Door @jeep JK installed today, along with a @adamsdriveshaft 1350 front driveshaft. Customer is ready for just about anything now!

Not gonna lie - I enjoy my off road vehicles - but it’s hard to beat something like this on pavement. My father’s 2014 @chevrolet #camaro #z28 - 505 HP, 6 speed, track ready hunk of goodness. No frills, no driver’s aides, just a raw driving experience. #waituntilthetiresarewarm #bringbackthemanual

Been busy. @ss_offroad Slimline Hybrid bumper and full length roof rack. @rigidindustries Dually SS on @ragofabrication ditch light brackets. @c4_fabrication rock sliders powder coated to match the SSO parts, then bolted onto the @toyotausa #4Runner frame. @morimotolighting HID kit in factory housings. Factory style switches in the dash where the blanks used to be. Front @kingshocks coil overs adjusted to add lift after all the weight was added, about 2.5-3” over stock, the aligned with some help from the #spcperformance UCAs. A little rake was left in prep for a new rear bumper, although the @toyteclifts springs and King resi shocks do a great job of handling the weight.

@roughcountry 30” LED bar bumper mount kit installed today on a 2014 @toyotausa #Tundra. Very simple kit to install. Also added some security with a tailgate lock from @popandlock to help keep items in the bed secure, with only having to use the keyless entry lock/unlock function. It’s tied into the factory door locks.

2012 @Jeep #JKU life’s using a 2.5” @teraflexsuspension kit, along with their Monster front track bar, and @rubiconexpress exhaust spacers to provide room for the front driveshaft at full droop. The look was rounded of by a set of @bfgoodrichtires KO2s wrapped around @kmcwheels RS3 wheels in matte black.

2018 @toyotausa #Tacoma with less than 1000 miles cane in for a revamped suspension setup. (Love working on clean vehicles!) swapped out the factory @bilsteinus shocks and struts to 5100 series pieces from Blistein. Along with that, 1” rear lift blocks from @procompusa were installed along with 1.25” wheel spacers from @g2axle. The blocks were added since the adjustable front struts are at the highest lift setting.

@Toyota #Tundra set up with some new @bilsteinus shocks and struts, with the front struts at the middle setting. Also threw on a new set of strut mounts, due to the mileage that was on the stockers.

Clean and simple. @bilsteinus shocks and adjustable struts used to level out this 2013 @ford F150 - I personally think this is a much better option than using spacers to achieve front lift for a minimal extra cost. Added to the look with a set of @level8motorsports Strike 6 17” matte black wheels wrapped in @toyotires R/T tires - 295/70r17s.

@rigidindustries Dually Side Shooters on @aceengineering pod mount spacers. Simple yet very effective on this new @jeep JL. #rigidindustries #needmorelumens #lightsbeforelockers

5th Gen @toyotausa 4Runner build started. This one got a full suspension upgrade sourced from @filthymotorsports - @kingshocks resi coil overs and rear shocks, rear springs, Specialty Products Company UCAs and all the necessary hardware. Up next is a winch mount front bumper, rock sliders, some LED lighting, new roof rack, possibly skid plates and a rear bumper setup. #4Runner #kingshocks #spcalignment #overlandbuild #itsnotajeep

Finally!!! Made time today to install the @rock_krawler Pro Tie Rod that I had the crew at RK send me after seeing it at EJS 2018. Sucker is beefy. Last piece was figuring out the stabilizer, which was made easy with a setup from @fox. Thanks again @jeremy_purick for everything you have done for me and the shop!!

@arb4x4 OME BP-51 suspension system installed on this 2018 @toyotausa Tacoma. This particular truck is being set up as an overland vehicle, so we added a set of @rideriteair air bags, with @daystarproducts lower bad perches so he can take full advantage on the rear suspension droop, while still supporting a slide in camper from @alucab. Up front a set of #SPCPerformance upper control arms were added, and the factory wheels wrapped in @bfgoodrichtires KO2s. A set of @nfabinc Nerf Steps, wheel to wheel with the third step, were added to provide access to the slide in camper.

Most Popular Instagram Hashtags